[SIPForum-discussion] Consultation - How to decode G729 (SIP)

Zuñiga, Guillermo Guillermo.Zuniga at cwpanama.com
Wed Jul 16 22:35:38 UTC 2014


Hi fellows,

Do you have any link to download the Open G.729 Decoder?

thanks




Guillermo Zuniga
Especialista de Soporte Técnico
Gerencia de Soporte Técnico

Tel:    +507 263-6671
Cel:    +507 6670-0481
Fax:    +507 265-3295
Email:  Guillermo.Zuniga at cwpanama.com

<http://www.cwpanama.com>

[cid:image3e8b53.JPG at 87cd3c83.419c76f8]<http://www.cwpanama.com/>

<http://www.facebook.com/masmovilpanama>

<http://www.cwpanama.com>

<http://bit.ly/MasMovil>



[cid:image4d95b6.JPG at fd9f9408.4e96a685]<http://www.facebook.com/masmovilpanama>

<http://www.facebook.com/masmovilpanama>
De: discussion-bounces at sipforum.org [mailto:discussion-bounces at sipforum.org] En nombre de Prakash Singh Chaudhary
Enviado el: jueves, 03 de julio de 2014 04:35 a.m.
Para: Vinicio Callejas
CC: discussion at sipforum.org
Asunto: Re: [SIPForum-discussion] Consultation - How to decode G729 (SIP)

Dear Vinicio,

Follow the below steps

First Download Audacity and Open G.729 Decoder
http://audacity.sourceforge.net/
http://codecpro.com/openInitG729.html
1.       On Wireshark under RTP, do show all streams and select the desired media stream for Analyzing.Then do Save Payload and keep the format as .raw. Like save it as g.729Forward.raw
2.       You will have to save both the directions media in different files like g.729Forward.raw and g.729Reverse.raw.
3.       Saving both the directions file will give you error.
4.       Then download the Open G.729 Decoder from Internet and convert the .raw files to .pcm format
c:\g729\
Syntax: va_g729_decoder.exe sample.raw sample.pcm.raw
 Example:
 cd c:\g729
 c:\g729\va_g729_decoder.exe forward.raw forward.pcm
 5.       Do this for both the files and the Open Audacity, Select Project  ==>Import Raw File ==> Select one of the two files and then choose
Signed 16-bit pc, no endianness, 1 channel (mono), Start offset:0, Amount to import: 100%, Sample Rate : 8000
6.       Select Project -> Import raw File... (for the other file)
Select the g729reverse.pcm file and choose the same settings. This will open both the forward and reverse PCM files in Audacity. When you click play, you will now be able to hear both sides of the conversation played together.

Regards.
Prakash Singh Chaudhary

On Sat, Jun 28, 2014 at 10:03 PM, Vinicio Callejas <vinicio.callejas at gmail.com<mailto:vinicio.callejas at gmail.com>> wrote:
Estimated sip-forum, I have some doubts about decoding codec G729 calls to listen to audio. With the purpose of determining audio problems!.

Best regards,
Vinicio Callejas

_______________________________________________
This is the SIP Forum discussion mailing list
TO UNSUBSCRIBE, or edit your delivery options, please visit http://sipforum.org/mailman/listinfo/discussion
Post to the list at discussion at sipforum.org<mailto:discussion at sipforum.org>



--



El contenido de este correo es confidencial y puede ser objeto de acciones legales.  Es dirigido solo para el o los destinatarios(s) nombrados anteriormente. Si no es mencionado como destinatario, no debe leer, copiar, revelar, reenviar o utilizar el contenido de este mensaje. Si ha recibido este correo por error, por favor notifique al remitente y proceda a borrar el mensaje y archivos adjuntos sin conservar copias.

The information contained in this e-mail is confidential and may also be subject to legal privilege.  It is intended only for the recipient(s) named above.  If you are not named as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email.  If you have received this e-mail in error, please notify the sender immediately by reply e-mail and delete the message and any attachments without retaining any copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20140716/cf1b3084/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image3e8b53.JPG
Type: image/jpeg
Size: 8898 bytes
Desc: image3e8b53.JPG
URL: <http://sipforum.org/pipermail/discussion/attachments/20140716/cf1b3084/attachment-0004.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image4d95b6.JPG
Type: image/jpeg
Size: 82483 bytes
Desc: image4d95b6.JPG
URL: <http://sipforum.org/pipermail/discussion/attachments/20140716/cf1b3084/attachment-0005.jpe>


More information about the discussion mailing list