[SIPForum-discussion] Sdp attribute for Call hold
Mirchandani, Pushpa
Pushpa.Mirchandani at charter.com
Fri Jun 28 15:37:03 UTC 2013
Here you go
Hi Ankur,
>
> a=inactive is used when the user wants neither to send data or receive
> any data on its port. By a=sendonly, user means that "I would not like
> to receive any media from you" and asking the other side to keep quite
> but it can send media. This is the main difference between inactive
> and sendonly.
>
> Thanks & regards,
> Chandra Madduri
> +91 98858 12968
From: discussion-bounces at sipforum.org [mailto:discussion-bounces at sipforum.org] On Behalf Of Keyur Amin
Sent: Thursday, June 27, 2013 10:26 AM
To: Banda, Srinivas (Srinivas); ankur bansal; discussion at sipforum.org
Subject: Re: [SIPForum-discussion] Sdp attribute for Call hold
Hi Ankur,
a=sendonly is the correct way. Here is some text from the rfc.
5.1 Unicast Streams
If the offerer wishes to only send media on a stream to its peer, it
MUST mark the stream as sendonly with the "a=sendonly" attribute. We
refer to a stream as being marked with a certain direction if a
direction attribute was present as either a media stream attribute or
a session attribute. If the offerer wishes to only receive media
from its peer, it MUST mark the stream as recvonly. If the offerer
wishes to communicate, but wishes to neither send nor receive media
at this time, it MUST mark the stream with an "a=inactive" attribute.
Thanks,
Keyur Amin
________________________________
________________________________
From: "Banda, Srinivas (Srinivas)" <sribanda at avaya.com>
To: ankur bansal <abh.ankur at gmail.com>; "discussion at sipforum.org" <discussion at sipforum.org>
Sent: Wednesday, June 26, 2013 1:45 AM
Subject: Re: [SIPForum-discussion] Sdp attribute for Call hold
Hi Ankur,
If a party is holding the call and the media attribute says SENDONLY, it means the party is using the MUSIC-ON-HOLD feature.
Regards
Srinivas
From: discussion-bounces at sipforum.org [mailto:discussion-bounces at sipforum.org] On Behalf Of ankur bansal
Sent: Wednesday, June 19, 2013 11:26 AM
To: discussion at sipforum.org
Subject: [SIPForum-discussion] Sdp attribute for Call hold
Hi All
Can anyone explain why a=sendonly is sent in offer from side performing HOLD ?
I think a=inactive should be right way of holding call .
Any specific scenario which explain when to use sendonly and when inactive
Thanks & regards
Ankur Bansal
_______________________________________________
This is the SIP Forum discussion mailing list
TO UNSUBSCRIBE, or edit your delivery options, please visit http://sipforum.org/mailman/listinfo/discussion
Post to the list at discussion at sipforum.org<mailto:discussion at sipforum.org>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20130628/3d50e3ce/attachment-0002.html>
More information about the discussion
mailing list