[SIPForum-discussion] Need a free sip desktop phone which provides interfaces to thirdparty application

[vijay swami]

Hi,
 thanks a lot for showing your interest.What can be the solution for this issue? what about uaCSTA protocol? Which softphone supports uaCSTA protocol?
 
Regards,
Vijay Swami 

  VIJAY

--- On Thu, 23/4/09, Nils Ohlmeier <nils at ohlmeier.com> wrote:


From: Nils Ohlmeier <nils at ohlmeier.com>
Subject: Re: [SIPForum-discussion] Need a free sip desktop phone which provides interfaces to thirdparty application
To: "vijay swami" <vijay_wce at yahoo.co.in>
Cc: discussion at sipforum.org, vivek1980ashu at gmail.com
Date: Thursday, 23 April, 2009, 6:54 PM


Hello,

Snom phones can send HTTP requests on certain events to a given
destination (like your application), like incoming or outgoing call etc.
But Snom phones are not free of charge and they are hardphones. Sounds
like you are looking for a softphone only.

Best regards
  Nils Ohlmeier

> Hi All,
>     I have one very strange requirement.I am devloping one non SIP Third
> party application.One desktop SIP phone is also running on same system.I
> have provided one text box for entering SIP URI and Place a call button in
> that Third party application.
>     here my requirement is, I will enter the SIP Uri in the text box
> provided by Non SIP Third party application and click on a button of Place
> a call.After that call should go through SIP Phone running on same system
> and subsequently my application should get the indication from sip phone
> i..e.200 OK,BYE etc. And even for incoming call also when SIP Phone
> receives incoming INVITE SIP phone should indicate to my application that
> incoming call has came and subsequently event of Call Connected ,Call end
> indication also should give to my application.
>      If i want to achive this then basically SIP Phone which is running
> itself should give some interface or it should give some provision, So
> that some third party application will get indications about the call
> status or some third party application should be able to make a call from
> his application through SIP Desktop phone.e.g Skype phone provides some
> commands ,command line interface so that any third party application can
> have control over the skype.By using those commands third party
> application can make a call through skype ,or it will get incoming call
> indication also from skype.
>      Like skype is there any SIP desktop phone which provides such
> interfaces to make call through SIP Phone by using Third party application
> ? Or what is the probable solution for this proble.Any kind of SIP Phone
> is fine for me ,only it should provide interfaces.How to get the Incoming
> call indication,Status of established call? How to make outgoing call so
> that if i click the button on third party application,call should go
> through SIP phone and UI should popup on SIP phone that Outgoing call to
> this no.
>   Please help me,How to achive this scenario?? I Know it is very strange
> requirement, That as a SIP devloper i never came across such requirement.
> I thought and browsed many phones like SJ Phone,X Lite,3CX,Eyebeam,Ekiga
> etc etc. But waste.I did not get usefule information.That is good brain
> teaser issue for devloper.Please add your thought how to achive this..
>  
>  
> Regards,
> Vijay Swami
>   
>
>
>       Cricket on your mind? Visit the ultimate cricket website. Enter
> http://beta.cricket.yahoo.com_______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
>





      Cricket on your mind? Visit the ultimate cricket website. Enter http://beta.cricket.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20090424/aa2f231d/attachment-0002.html>