[SIPForum-discussion] call-id and cseq relation -> rfc 3261 clarification help required

rupandeep singh er_rupandeep at yahoo.com
Mon May 27 07:32:03 UTC 2013


Hi,

When a INVITE for 407 is sent it is send on the same dialog so that Proxy can verify it is invite for same call for which i have send 407.
But since it would be different request and not a re-transmision of initial INVITE so Cseq increases to indicate this thing.

Hope this clarifies your doubt.

Regards
Rupandeep Singh




________________________________
 From: Vijay Badola <Vijay.Badola at onmobile.com>
To: "SAKCA, HALIT (HALIT)" <halit.sakca at alcatel-lucent.com>; "discussion at sipforum.org" <discussion at sipforum.org> 
Sent: Wednesday, April 3, 2013 2:40 PM
Subject: Re: [SIPForum-discussion] call-id and cseq relation -> rfc 3261	clarification help required
 


 
Hi,
UAC SHOULD use the same Call-ID header field value for registrations sent to a particular Registrar.
CSeq, from-tag and some other header field value will differ.
Even when UAC will go to refresh its registration SHOULD use same Call-ID header field value.
 
Regards,
Vijay Badola 
 
From:discussion-bounces at sipforum.org [mailto:discussion-bounces at sipforum.org] On Behalf Of SAKCA, HALIT (HALIT)
Sent: Thursday, March 28, 2013 4:58 PM
To: discussion at sipforum.org
Subject: [SIPForum-discussion] call-id and cseq relation -> rfc 3261 clarification help required
 
Dear All,
 
Could you please help me to figure out following scenario and RFC 3261 statement?
A sip call with auth;
1.       Agcf -> INVITE  -> scscf 
2.       Agcf <- 407  <- scscf
3.       Agcf -> INVITE  -> scscf
.
.
.
 
The INVITE in 3rdhas a different call-id than the INVITE in 1st,
I see in RFC that;
 
RFC 3261 clause 22.2 states (at the end of the clause):
 
   When a UAC resubmits a request with its credentials after receiving a
   401 (Unauthorized) or 407 (Proxy Authentication Required) response,
   it MUST increment the CSeq header field value as it would normally
   when sending an updated request.
 
Does ‘Incrementing Cseq’ basically means that the CallID remains the same?
I am wondering if it is only in case the UAC RESUBMITS a request.
In request above we don't resubmit so we don't have to follow this rule.
The UAC is not obliged to resubmit. 
 
Am I correct?
 
Regards,
Halit
 
 
________________________________
 
DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution
 of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. Further, this e-mail may contain viruses and all reasonable precaution
 to minimize the risk arising there from is taken by OnMobile. OnMobile is not liable for any damage sustained by you as a result of any virus in this e-mail. All applicable virus checks should be carried out by you before opening this e-mail or any attachment
 thereto.
Thank you - OnMobile Global Limited.
 
_______________________________________________
This is the SIP Forum discussion mailing list
TO UNSUBSCRIBE, or edit your delivery options, please visit http://sipforum.org/mailman/listinfo/discussion
Post to the list at discussion at sipforum.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20130527/432b5956/attachment-0002.html>


More information about the discussion mailing list