[SIPForum-discussion] Sipp tool

[kalyan chowdary]

Hi,

I am tying to call to polycom test machines with sip-tester(Sipp) using
sipp -sn uac 140.242.250.200 -m 1 -tace_calldebug

I am not getting any response from that machine but when i call from
LifeSize  unit(sip call),call established.

Here is my debug information::::
Call debugging information for call 1-14025 at 127.0.1.1:
2011-08-19      02:11:09:120    1313734269.120520 Starting call
1-14025 at 127.0.1.1
2011-08-19      02:11:09:120    1313734269.120596 Processing message 0 of
type 2 for call 1-14025 at 127.0.1.1 at 102.
2011-08-19      02:11:09:120    1313734269.120637 Sending UDP message for
call 1-14025 at 127.0.1.1 (index 0, hash 561789690):
INVITE sip:service at 140.242.250.200:5060 SIP/2.0
Via: SIP/2.0/UDP 127.0.1.1:5061;branch=z9hG4bK-14025-1-0
From: sipp <sip:sipp at 127.0.1.1:5061>;tag=14025SIPpTag001
To: sut <sip:service at 140.242.250.200:5060>
Call-ID: 1-14025 at 127.0.1.1
CSeq: 1 INVITE
Contact: sip:sipp at 127.0.1.1:5061
Max-Forwards: 70
Subject: Performance Test
Content-Type: application/sdp
Content-Length:   129

v=0
o=user1 53655765 2353687637 IN IP4 127.0.1.1
s=-
c=IN IP4 127.0.1.1
t=0 0
m=audio 6000 RTP/AVP 0
a=rtpmap:0 PCMU/8000


Can  any one plz tell where i am doing wrong?

Thanks
kalyan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20110819/273c951c/attachment-0002.html>