[SIPForum-discussion] Call Failed with SIP 486 Busy for G.723 codec

[AMIT ANAND]

On Tue, Oct 5, 2010 at 6:44 PM, amit salunkhe <amitsalunkhe21 at gmail.com>wrote:

> Hi All
>
> Can anybody tell me is this possible if we orginate call with G723 codec
> for PLMN/PSTN mobile number, then that call will failed from destination
> side within 1/2 ring with SIP response 486 Busy?
>
> Here call flow is described below.
>
> USEE A---->SBC1----->SBC2------>TDM g/w1-------->mobile MSC--------->USER B
>
>
> Please lte me know what aree the different reasons for such call failure
> within 1 or 1/2 ring
>
>
> Regards
> Amit--
>
>
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
>
>
Hi Amit,

Ideally 486 has nothing to do with codec, unless there are some special
settings at termination end. Ideally if it does not like the codec it should
give 488 unacceptable here.

-- 
Thanks
Amit Anand
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20101006/95d0754c/attachment-0002.html>