[SIPForum-discussion] Call with a Invite after 200OK

AMIT ANAND amiit.anand at gmail.com
Fri May 14 07:12:40 UTC 2010


Hi Guilermo,

You need to check with the UAS to know why they are sending 500 for a
reinvite.
Vijay Tiwari is absolutely right here , IF UAS does not like changes in SDP
it should send 488 instead of 5XX.
To me it seems like due to this Re Invite UAS goes to some unknown state and
since it does not able to process this in first clears the Transaction with
500. And after that clears the Dialog with Bye.
To get the reason for 500 you would have to talk to the Vendor of IP
216.82.110.165, only they can confirm the exact reason.

Cheers
Amit Anand


On Thu, May 13, 2010 at 11:48 PM, Jyoti Parija <JParija at veraznet.com> wrote:

>  Vijay,
>
>
>
> I am just referring to why the 2nd re-invite was sent not the failure
> reason. There can be several reasons for failure depending on the UAS type,
> state and behavior.
>
>
>
>
>
> Jyoti
>
>
>  ------------------------------
>
> *From:* Vijay Tiwari [mailto:vijay11tiwari at gmail.com]
> *Sent:* Thursday, May 13, 2010 10:59 AM
> *To:* Jyoti Parija
> *Cc:* Zuñiga, Guillermo; discussion at sipforum.org
> *Subject:* Re: [SIPForum-discussion] Call with a Invite after 200OK
>
>
>
> Hello Jyoti
>
>
>
> That is not the problem because if this the case then UAS will send 488
> not acceptable here error code not 500 server internal error
>
>
>
> thanks
>
> vijay
>
>
>
>
>
> On Wed, May 12, 2010 at 11:35 PM, Jyoti Parija <JParija at veraznet.com>
> wrote:
>
> The other INVITE is a Re-INVITE sent with different SDP, in this case the
> Re-INVITE has only CODEC G729 & maxptime value 20 but it was 10 in the
> initial INVITE.
>
>
>
> Hope this will help.
>
>
>
> Regards,
>
> Jyoti
>
>
>  ------------------------------
>
> *From:* discussion-bounces at sipforum.org [mailto:
> discussion-bounces at sipforum.org] *On Behalf Of *Zuñiga, Guillermo
> *Sent:* Wednesday, May 12, 2010 7:23 AM
> *To:* discussion at sipforum.org
> *Subject:* [SIPForum-discussion] Call with a Invite after 200OK
>
>
>
> Hi Fellows.
>
>
>
> I have a situation with a specific call peer to peer.
>
> I am seeing that after the call is completed with 200Ok I am sending back
> another Invite with SDP and after that
>
> The end-peer is sending me a 500 Server Internal Error.
>
> If someone could help me to detect what could be causing that I have to
> send another Invite if the call is already completed?
>
>
>
> I am attaching a sniffer call, with the scenarios.
>
>
>
> Thanks a lot for your help
>
>
>
>
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
>
>
>
>
> --
> They can because they think they can.
>
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
>
>


-- 
Thanks
Amit Anand
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20100514/63226bd3/attachment-0002.html>


More information about the discussion mailing list