[SIPForum-discussion] user=phone problem

[sri nivas]

even then if u want to display 10digit number it is not possible



On Wed, Jun 23, 2010 at 10:02 PM, Pranab Bohra <pranab.bohra at gmail.com>wrote:

> Hi,
>
> The userinfo part of the SIP URI should conform TEL URI (rfc 3966)
> after you added "user=phone" parameter.
>
> According to 3966, the telephone-subscriber (i.e. userinfo part of SIP
> URI) can be a global number or local number.
> A global number MUST start with "+" and a local number MUST include
> the phone-context parameter.
> Therefore in your case, after the addition of user=phone parameter,
> the URI is no more compliant with the standard and probably that is
> the reason why the request is rejected by the far end.
>
> If possible, try changing the Request-URI to something like:
> Request-URI: sip:0137780434;phone-context=ims.tm.com.my;user=phone
>
> OR
>
> Request-URI: sip:+0137780434;user=phone
>
> Cheers,
> Pranab
>
> On Tue, Jun 22, 2010 at 5:50 AM, ridhuan yusof <mridhuan at gmail.com> wrote:
> > Hi,
> >
> > Anyone can help me for below issue...
> >
> > On Mon, Jun 14, 2010 at 9:39 PM, ridhuan yusof <mridhuan at gmail.com>
> wrote:
> >>
> >> I got wireshark trace. Attached. Kindly seek your help.
> >>
> >> Here are two comparison captured from wireshark :
> >>
> >> 1. user=phone enabled
> >>    problem : incoming call ok but can't make outgoing call. 500 Server
> >> internal error msg appear. the warning said "deserial header failed".
> But if
> >> the SIP phone receive an incoming call the outgoing call can through.
> >>
> >> Request-Line: INVITE sip:0137780434 at ims.tm.com.my<sip%3A0137780434 at ims.tm.com.my>
> ;
> >> user=phone SIP/2.0
> >>         Method: INVITE
> >>         Request-URI: sip:0137780434 at ims.tm.com.my<sip%3A0137780434 at ims.tm.com.my>
> ;user=phone
> >>             Request-URI User Part: 0137780434
> >>             Request-URI Host Part: ims.tm.com.my
> >>
> >>
> >> 2. user=phone disabled. incoming and outgoing call ok.
> >>
> >> Request-Line: INVITE sip:0137780434 at ims.tm.com.my<sip%3A0137780434 at ims.tm.com.my>SIP/2.0
> >>         Method: INVITE
> >>         Request-URI: sip:0137780434 at ims.tm.com.my<sip%3A0137780434 at ims.tm.com.my>
> >>             Request-URI User Part: 0137780434
> >>             Request-URI Host Part: ims.tm.com.my
> >>
> >> Thanks. Appreciate to help.
> >>
> >> On Mon, Jun 14, 2010 at 9:29 PM, Nitin Kapoor <nitinkapoorr at gmail.com>
> >> wrote:
> >>>
> >>> Do you have the trace for this call?
> >>>
> >>>
> >>> On 14 June 2010 09:25, ridhuan yusof <mridhuan at gmail.com> wrote:
> >>>>
> >>>> Folks,
> >>>>
> >>>> I hv problem where I can't make an outbound call when I enable
> >>>> "user=phone" parameter in SIP. Anyone experience about this.Appreciate
> to
> >>>> share.
> >>>>
> >>>> Tq.
> >>>>
> >>>> _______________________________________________
> >>>> This is the SIP Forum discussion mailing list
> >>>> TO UNSUBSCRIBE, or edit your delivery options, please visit
> >>>> http://sipforum.org/mailman/listinfo/discussion
> >>>> Post to the list at discussion at sipforum.org
> >>>>
> >>>
> >>
> >
> >
> > _______________________________________________
> > This is the SIP Forum discussion mailing list
> > TO UNSUBSCRIBE, or edit your delivery options, please visit
> > http://sipforum.org/mailman/listinfo/discussion
> > Post to the list at discussion at sipforum.org
> >
> >
>
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20100625/dd891915/attachment-0002.html>