[SIPForum-discussion] Request URI in case of tel uri registration

[dushyant mishra]

Hi,
As per RFC 3261 >>

Request-URI: The Request-URI names the domain of the location
service for which the registration is meant

(for example,"sip:chicago.com"). The "userinfo" and "@" components of the SIP URI MUST NOT be present.


So Correct procedure willbe >>

- Request-Line: REGISTER tel:ims118.aaa.net<http://ims118.aaa.net> SIP/2.0


Regards
Dushyant
________________________________________
From: discussion-bounces at sipforum.org [discussion-bounces at sipforum.org] On Behalf Of Ashutosh Panda [ashubdk at gmail.com]
Sent: Tuesday, 6 July 2010 7:11 PM
To: discussion at sipforum.org
Subject: [SIPForum-discussion] Request URI in case of tel uri registration

Hi All,

This is a question regarding implementation of tel uri in a REGISTER message.
Whether the uri should contain only the 'URI' in SIP REGISTER or it should contain "tel:URI" as the Request URI.

Please confirm which of these two syntax are correct.
- Request-Line: REGISTER tel:ims118.aaa.net<http://ims118.aaa.net> SIP/2.0
OR
- Request-Line: REGISTER ims118.aaa.net<http://ims118.aaa.net> SIP/2.0

Thanks
Ashutosh


"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."