[SIPForum-discussion] Cisco AS 500 with E1 connection - help required

[Ramesh Chauhan]

Hi,
   
  Having 2 Cisco AS5300 Routers. Connection Are mentioned below:
  Each is having 1 FastEthernet Card & 4 E1s.
  Connected E1 0 of first router with E1 0 of second,
                   E1 1 of first router with E1 1 of second,
                   E1 2 of first router with E1 2 of second,
                   E1 3 of first router with E1 3 of second,
   
  SIPProxy------(through IP)------Cisco_01====(through E1)====Cisco_02-----(throu IP)--------Carrier
   
  Prefix required from 50093 & prefix required at carrier == null(meanx no prefix
   
  ISSUE : when i m dialing any number I m getting session progress from cisco_02 & getting long beep sound.
   
  Please suggest any solution.
   
   
   
   
   
   
   
   
  -------------------------------------------
  Routers Configuration is as follows:
   
  Cisco_01:
  
cisco_01#sh running-config 
Building configuration...
  Current configuration : 3167 bytes
!
version 12.3
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname cisco_01
!
boot-start-marker
boot-end-marker
!
!
!
!
resource-pool disable
!
no aaa new-model
ip subnet-zero
ip name-server x.x.x.x
ip name-server x.x.x.x
!
!
isdn switch-type primary-net5
!
!
voice service pots 
 fax protocol pass-through g711ulaw
!
voice service voip 
 fax protocol pass-through g711ulaw
 h323
 modem passthrough nse codec g711ulaw
 sip
  min-se  120 
!
voice class codec 1
 codec preference 1 g729r8
 codec preference 2 g723r63
 codec preference 3 gsmfr bytes 66
 codec preference 4 g729br8
 codec preference 5 g723ar63
!
!
dial-control-mib retain-timer 1000
dial-control-mib max-size 1200
!
!
controller E1 0
 clock source line primary
 pri-group timeslots 1-31
 description E1 0
   
  interface Serial0:15
 no ip address
 isdn switch-type primary-net5
 isdn incoming-voice modem
 isdn bchan-number-order ascending 
 no cdp enable
!
interface FastEthernet0
 ip address x.x.x.x 255.255.255.240
 duplex auto
 speed auto
!
ip classless
ip route 0.0.0.0 0.0.0.0 x.x.x.x
no ip http server
!
!
!
voice-port 0:D
 input gain 1
 no echo-cancel enable
!
!
!
dial-peer voice 10 voip
 incoming called-number .
 rtp payload-type cisco-rtp-dtmf-relay 98
 voice-class codec 1
 session protocol sipv2
 dtmf-relay rtp-nte
 no vad
!
dial-peer voice 500930 pots
 preference 2
 destination-pattern 50093.
 calling-number outbound sequence 12127773456
 no digit-strip
 port 0:D
!
--------------------------------------------------------------------
  Cisco_02:
  cisco_02#sh running-config 
Building configuration...
  Current configuration : 3300 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname cisco_02
!
boot-start-marker
boot-end-marker
!!
!
resource-pool disable
!
no aaa new-model
ip subnet-zero
ip name-server x.x.x.x
ip name-server x.x.x.x
!
!
isdn switch-type primary-net5
!
!
voice service pots 
 fax protocol pass-through g711ulaw
!
voice service voip 
fax protocol pass-through g711ulaw
 h323
 modem passthrough nse codec g711ulaw
 sip
  min-se  120 
!
voice class codec 1
 codec preference 1 g729r8
 codec preference 2 g723r63
 codec preference 3 gsmfr bytes 66
 codec preference 4 g729br8
 codec preference 5 g723ar63
 codec preference 6 g711ulaw
 codec preference 7 g711alaw
!
voice class codec 2
 codec preference 1 gsmfr
!
voice class codec 3
 codec preference 1 g711ulaw
 codec preference 2 g711alaw
 codec preference 3 g729r8
 codec preference 4 g723r63
!
dial-control-mib retain-timer 1000
dial-control-mib max-size 1200
!
!
controller E1 0
 clock source line primary
 pri-group timeslots 1-31
 description E1 0
!
translation-rule 11
 Rule 1 50093 50091
!
!
interface Serial0:15
 no ip address
 isdn switch-type primary-net5
 isdn protocol-emulate network
 isdn incoming-voice modem
 no cdp enable
!
!
interface FastEthernet0
 ip address x.x.x.x 255.255.255.240
 duplex auto
 speed auto
!
ip classless
ip route 0.0.0.0 0.0.0.0 x.x.x.x
no ip http server
!
!
voice-port 0:D
 input gain 1
 no echo-cancel enable
!
!
dial-peer voice 50 voip
 translation-profile outgoing 11
 destination-pattern .
 rtp payload-type cisco-rtp-dtmf-relay 98
 voice-class codec 3
 session protocol sipv2
 session target ipv4:y.y.y.y
 dtmf-relay rtp-nte
 no vad

   dial-peer voice 1000 pots
 incoming called-number 50093
 port 0:D
!
!                
   
   
  Thanks & Regards
  Chauhan
   
   
   

       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20080427/71f9fc15/attachment-0002.html>