[SIPForum-discussion] Is "fmtp" line needed in 200 OK answer?

Andrea Puddu androjoker at hotmail.com
Sun Dec 16 20:35:09 UTC 2007

Don't you think it is due to the lack of "fmtp" line in the 200 OK response?

Thanks for your feedback,


From: sakcahalit at hotmail.com
To: androjoker at hotmail.com; baolovebao at gmail.com
CC: discussion at sipforum.org
Subject: RE: [SIPForum-discussion] Is "fmtp" line needed in 200 OK answer?
Date: Sun, 16 Dec 2007 20:53:33 +0200

Hi Andrea,


As other guys mentioned I dont think that is related with "g" and "G", is it possible that you can change the codec?


There is an other difference ;


m=audio 19570 RTP/AVP 18 8 0

m=audio 57956 RTP/AVP 18 8 0



m=<media><port><transport><media format list>

so check the ports!


hope you ll resolve it :)




From: androjoker at hotmail.com
To: baolovebao at gmail.com
Date: Wed, 12 Dec 2007 08:34:56 +0000
CC: discussion at sipforum.org
Subject: Re: [SIPForum-discussion] Is "fmtp" line needed in 200 OK answer?

I agree with your analysis. I've noticed that for example Cisco and Linksys phone sends only one codec in the 200 OK SDP envelope.

But... Can the sending of multiple codec in the 200 OK response be an issue?
I cannot complain with phone provider about this behaviour. 

Anyway why does the phone talk with G729 and AS talk with G711?  I'm wondering if the AS performs a check on  fmtp field in the 200 OK response .................



Date: Wed, 12 Dec 2007 16:24:05 +0800
From: baolovebao at gmail.com
To: androjoker at hotmail.com
Subject: Re: [SIPForum-discussion] Is "fmtp" line needed in 200 OK answer?
CC: discussion at sipforum.org

# the "g" and "G" have no difference. and the offer indicate that it's not G729B codec.
# I don't think the lack of fmtp in answer is the reason for issue. Maybe the ip phone should reply only one codec in its SDP. Maybe the multi codec in answer make the offer confused.

On 12/11/07, Andrea Puddu <androjoker at hotmail.com> wrote: 

Hello guys,

I'm facing an issue when a mobile (common mobile 3G phone) tries to call an internal SIP phone through its geographical number.
The issue is that when the SBC sends the INVITE to the IP phone,  in the SDP  enclosure it  suggests these codecs: 

m=audio 19570 RTP/AVP 18 8 0
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000

The 200 OK of the phone (SDP part only) is:

m=audio 57956 RTP/AVP 18 8 0
a=rtpmap:18 g729/8000
a=rtpmap:8 pcma/8000
a=rtpmap:0 pcmu/8000

So the IP phone start to talk with G729 and SBC replies with G711A!!! So I can't hear the voice coming from mobile phone!!!!

I have two questions:

- Can the difference between the offer (G729) and the answer (g729) be significant? I mean the difference because the "g" is not capital in the answer
- Can the lack of the "fmtp" line in the answer cause troubles? 

Thanks 1000,



Prenditi una pausa e sfida i tuoi amici a Ladybird su Messenger! Messenger Giochi
This is the SIP Forum discussion mailing list
TO UNSUBSCRIBE, or edit your delivery options, please visit http://sipforum.org/mailman/listinfo/discussion
Post to the list at discussion at sipforum.org


Per questo Natale fai i tuoi auguri con Messenger! Windows Live Messenger 
Tamamıyla yeni Windows Live Messenger ailesine katıl Buraya tıkla!

Ti piace giocare con le lettere? Prova ABCLive!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20071216/bdc5065e/attachment-0002.html>

More information about the discussion mailing list