[SIPForum-discussion] Blank call flow in SIP
Ramachandra moorthy
ramcm.irtt at gmail.com
Thu Feb 20 05:15:03 UTC 2014
Hi All,
Thanks for all.
Pls find below SDP and ISUP message from sender.
No IPs found like 0.0.0.0 and "sendrecv " available in SDP.
But in ISUP message Echo control indicator not included.
-unique-boundary-1
Content-Type: application/sdp
v=0
o=- 16464421 16464421 IN IP4 10.129.247.251
s=-
t=0 0
a=sendrecv
m=audio 34362 RTP/AVP 96 8 97 98 99
c=IN IP4 10.129.34.11
a=rtpmap:96 AMR/8000
a=fmtp:96 mode-set=0,2,4,7;mode-change-period=2;mode-change-neighbor=1
a=rtpmap:8 PCMA/8000
a=rtpmap:97 AMR/8000
a=fmtp:97 mode-set=7
a=rtpmap:98 GSM-EFR/8000
a=rtpmap:99 telephone-event/8000
a=fmtp:99 0-15
a=maxptime:40
--unique-boundary-1
Content-Type: application/isup;version=itu-t92+;base=itu-t92+
Content-Disposition: signal;handling=required
IAM----Initial address message
Mandatory parameter:
Nature of connection
indicators:
Satellite indicator:1 satellite circuits in the connection
Continuity check indicator:Continuity check not required
Echo control device
indicator:Not Include
Forward call indicators:
International/national call
indicator:national call
End-to-end method indicator: Not available
Interworking
indicator: Interworking not encountered
End-to-end information indicator: Not
available
ISDN user part indicator: ISDN user part used all the way
ISDN user
part preference indicator: ISDN user part preferred all the way
ISDN access
indicator: Originating access
SCCP method indication: No indication
Collect
Call:0
Calling party category:Ordinary subscriber
Transmission medium
requirement:Speech
Called party number:
Nature of address: National
(significant) number
Internal network number indicator (INN): *routing to
internal network number not allowed
Numbering plan indicator: ISDN numbering
plan
Address signal: 04428251552F
Optional parameter:
Calling party number:
Nature of address: National (significant) number
Calling party number
incomplete indicator (NI): *Complete
Numbering plan indicator: ISDN numbering
plan
Address presentation restricted indicator: Presentation allowed
Screening
indicators: Network provided
Address signal: 9412000135
Optional forward call
indicator:
(CUG)call indicator:Closed user group call, outgoing access
allowed
Simple segmentation indicator:No additional information will be sent
Connected line identify request indicator:Request
Closed user group interlock
code:
Network identification (NI): 9_4_1_2
CUG Group NO: 3
User service
information:
Coding standard:CCITT standard coding
Information transfer
capability:Speech
Transfer mode:Circuit mode
Information transmission rate
(terminating point->originating point):64 kbit/s
User information Layer 1
protocol:Recommendation G.711 A-law
Propagation delay counter: 90 ms
MLPP
precedence:
LFB:LFB not allowed
Precedence level: Routine
Network
identification (NI): 0_9_1_0
MLPP service domain 00_00_00
Location number:
Nature of address: International number
Internal network number indicator
(INN):
*routing to internal network number not allowed
Numbering plan
indicator: ISDN numbering plan
Address presentation restricted indicator:
Presentation allowed
Screening indicators: Network provided
Address signal:
919457099995
Parameter compatibility Information:
Parameter#1
Propagation
delay counter:
Transit at intermediate exchange indicator: Transit
interpretation
Release call indicator: Not release call
Send notification:
Not Send notification
Discard message indicator: Not Discard message
Discard
parameter indicator:discard parameter
Pass on not possible indicator:discard
parameter
*----------end isup message data----------*/
With Regards
M. Ramachandramoorthy
NGN-BSNL
+91- 9600070877
On Thu, Feb 20, 2014 at 12:56 AM, prashant tripathi
<prashant.tpt at gmail.com>wrote:
> dear,
>
> can you please confirm if media attribute in SDP is "sendrecv" also if
> there is any value in media ip or it's marked as 0.0.0.0?
>
> On Tue, Feb 18, 2014 at 3:03 PM, Ramachandra moorthy
> <ramcm.irtt at gmail.com> wrote:
> > Hi All,
> >
> > I am doing testing with mobile to PSTN calls via SIP.
> > Found all calls are mute calls.
> > I have tested with mobile to mobile,few calls are ok remaining all are
> mute.
> > Also compared normal call and problematic call traces,all are seems same
> > only.
> >
> > All media IPs are re3achable from both the ends.
> >
> > Kindly suggest me to analyse further to find the root cause.
> >
> > Also pls clarify is there any signaling flow in SIP for blank calls.
> >
> > pls help
> >
> > With Regards
> >
> > M. Ramachandramoorthy
> > +91- 9600070877
> >
> > _______________________________________________
> > This is the SIP Forum discussion mailing list
> > TO UNSUBSCRIBE, or edit your delivery options, please visit
> > http://sipforum.org/mailman/listinfo/discussion
> > Post to the list at discussion at sipforum.org
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20140220/d1fdaf95/attachment-0002.html>
More information about the discussion
mailing list