[SIPForum-discussion] Consultation - How to decode G729 (SIP)

[Munjal Patel]

Try using cloudshark.org

Munjal

Sent from my iPhone

> On Jul 16, 2014, at 5:34 PM, Zuñiga, Guillermo <Guillermo.Zuniga at cwpanama.com> wrote:
> 
> Hi fellows,
>  
> Do you have any link to download the Open G.729 Decoder?
>  
> thanks
>  
>  
> 
> Guillermo Zuniga
> Especialista de Soporte Técnico
> Gerencia de Soporte Técnico
> 
> Tel:	+507 263-6671
> Cel:	+507 6670-0481
> Fax:	+507 265-3295
> Email:	Guillermo.Zuniga at cwpanama.com
> 
> <image3e8b53.JPG>
> 
> 
> 
> 
>  
> 
> <image4d95b6.JPG>
> 
> 
> De: discussion-bounces at sipforum.org [mailto:discussion-bounces at sipforum.org] En nombre de Prakash Singh Chaudhary
> Enviado el: jueves, 03 de julio de 2014 04:35 a.m.
> Para: Vinicio Callejas
> CC: discussion at sipforum.org
> Asunto: Re: [SIPForum-discussion] Consultation - How to decode G729 (SIP)
>  
> Dear Vinicio,
>  
> Follow the below steps
>  
> First Download Audacity and Open G.729 Decoder
> http://audacity.sourceforge.net/
> http://codecpro.com/openInitG729.html
> 1.       On Wireshark under RTP, do show all streams and select the desired media stream for Analyzing.Then do Save Payload and keep the format as .raw. Like save it as g.729Forward.raw
> 2.       You will have to save both the directions media in different files like g.729Forward.raw and g.729Reverse.raw.
> 3.       Saving both the directions file will give you error.
> 4.       Then download the Open G.729 Decoder from Internet and convert the .raw files to .pcm format
> c:\g729\ 
> Syntax: va_g729_decoder.exe sample.raw sample.pcm.raw
>  Example:
>  cd c:\g729
>  c:\g729\va_g729_decoder.exe forward.raw forward.pcm
>  5.       Do this for both the files and the Open Audacity, Select Project  èImport Raw File è Select one of the two files and then choose
> Signed 16-bit pc, no endianness, 1 channel (mono), Start offset:0, Amount to import: 100%, Sample Rate : 8000
> 6.       Select Project -> Import raw File... (for the other file)
> Select the g729reverse.pcm file and choose the same settings. This will open both the forward and reverse PCM files in Audacity. When you click play, you will now be able to hear both sides of the conversation played together.
>  
> Regards.
> Prakash Singh Chaudhary 
>  
> 
> On Sat, Jun 28, 2014 at 10:03 PM, Vinicio Callejas <vinicio.callejas at gmail.com> wrote:
> Estimated sip-forum, I have some doubts about decoding codec G729 calls to listen to audio. With the purpose of determining audio problems!.
>  
> Best regards,
> Vinicio Callejas
> 
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
> 
> 
> 
>  
> -- 
> 
> 
> 
> 
> Disclaimer: 
> El contenido de este correo es confidencial y puede ser objeto de acciones legales. Es dirigido solo para el o los destinatarios(s) nombrados anteriormente. Si no es mencionado como destinatario, no debe leer, copiar, revelar, reenviar o utilizar el contenido de este mensaje. Si ha recibido este correo por error, por favor notifique al remitente y proceda a borrar el mensaje y archivos adjuntos sin conservar copias. 
> The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender immediately by reply e-mail and delete the message and any attachments without retaining any copies.   ­­  
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20140805/6d4f55d3/attachment-0002.html>