[SIPForum-discussion] SIP UAs for making SIP Calls in Lab

[Gopalakrishnan N]

just click over the display and type the URL like 2001 at 192.168.1.1, it will
route through.


On Thu, Sep 5, 2013 at 10:47 PM, Vijay Kumar <vj.tech776 at gmail.com> wrote:

> Hi Gopalakrishnan
> Thanks for the information
> i have downloaded but iam unable to dial by URL/IP address .
> The display is only used to dial number.
> WHat should i do to dial by IP address/
>
> The X-lite iam using X-Lite_Win32_1002tx_29712
>
> Regards
> Vijay
>
>
> On Wed, Sep 4, 2013 at 4:36 PM, Gopalakrishnan N <saigop at gmail.com> wrote:
>
>> If you dont want to use softphone wihtout proxy then you can install two
>> xlite phone and can dial out via URI dialing. by A's IP in B softphone and
>> B's IP in A softphone.
>>
>> Regards,
>>
>>
>> On Tue, Sep 3, 2013 at 12:41 AM, Vijay Kumar <vj.tech776 at gmail.com>wrote:
>>
>>> Hi all
>>> I want to install two SIP Soft phones on different machines without a
>>> proxy in between.
>>>
>>> 1. Can you please tell me which FREE SIP UAs i can use.
>>>
>>> 2. Can this be also used with Asterisk PBx in between
>>>
>>> --
>>> Regards
>>> Vijay
>>>
>>>
>>> _______________________________________________
>>> This is the SIP Forum discussion mailing list
>>> TO UNSUBSCRIBE, or edit your delivery options, please visit
>>> http://sipforum.org/mailman/listinfo/discussion
>>> Post to the list at discussion at sipforum.org
>>>
>>>
>>
>>
>> --
>> Thank you  with regards,
>> Gopalakrishnan A.N.
>> VoIP call - sip:saigop at gtalk2voip.com
>>
>>
>


-- 
Thank you  with regards,
Gopalakrishnan A.N.
VoIP call - sip:saigop at gtalk2voip.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20130906/8a113df2/attachment-0002.html>