[SIPForum-discussion] SIP 180 ringing

[John Downing]

Hi Walid:

The 183/SDP is required to establish one way RTP so you can hear the other
phone ring.  Then the 200OK will include another SDP so you can talk.  You
may want to review the RFCs then re-examine your configuration.  Best of
luck.

On Wed, May 9, 2012 at 10:55 AM, Walid Hbiriq <hbiriq.walid at gmail.com>wrote:

> the RTP is established and we can talk each other but i cant hear the
> ringing before start talking.****
>
> ** **
>
> My question is : it can be that some equipment don’t allow this kind of
> message (183:SDP) ? ****
>
> ** **
>
> Excuse my English :D ****
>
> ** **
>
> Thks a lot John J****
>
> ** **
>
> *De :* John Downing [mailto:john at trainingcity.com]
> *Envoyé :* mercredi 9 mai 2012 13:48
>
> *À :* Walid Hbiriq
> *Cc :* discussion at sipforum.org
> *Objet :* Re: [SIPForum-discussion] SIP 180 ringing****
>
> ** **
>
> Hi Walid:****
>
> ** **
>
> There should not be a 180 Ringing.  It is not part of the call flow.  Your
> phone should establish one way audio based on the 183/SDP.  Perhaps your
> SBC is not allowing the RTP to flow to the caller?****
>
> On Wed, May 9, 2012 at 10:41 AM, Walid Hbiriq <hbiriq.walid at gmail.com>
> wrote:****
>
> Hi John,****
>
>  ****
>
> It’s ok about the two SDP msg ,i will send you a trace an you will see
> that there is no 180 ringing.****
>
>  ****
>
> *De :* John Downing [mailto:john at trainingcity.com]
> *Envoyé :* mercredi 9 mai 2012 12:29****
>
>
> *À :* Walid Hbiriq
> *Cc :* discussion at sipforum.org
> *Objet :* Re: [SIPForum-discussion] SIP 180 ringing****
>
>  ****
>
> Hi Walid:****
>
>  ****
>
> Make sure you are receiving an SDP with the 183.  The caller should
> receive two SDP msgs.  The first with the 183 to establish one way audio,
> allowing the caller to hear the call progression coming from the PSTN.  The
> second SDP is sent with the 200OK when the PSTN target answers to establish
> full duplex audio.****
>
> On Wed, May 9, 2012 at 5:46 AM, Walid Hbiriq <hbiriq.walid at gmail.com>
> wrote:****
>
> Hi John ,****
>
> The problem is not that i expect 180 or not ,but the caller (me) can’t
> hear the ringing .when I make the call ,I hear silence and then RTP is
> established .****
>
>  ****
>
> You get my mean?****
>
>  ****
>
> *De :* John Downing [mailto:john at trainingcity.com]
> *Envoyé :* mardi 8 mai 2012 20:26
> *À :* Walid Hbiriq
> *Cc :* discussion at sipforum.org
> *Objet :* Re: [SIPForum-discussion] SIP 180 ringing****
>
>  ****
>
> Hi Walid:****
>
>  ****
>
> A 183 call progress from the PSTN gateway is normal.  You would not expect
> a 180.  The 183 should have an SDP attached to allow one way RTP audio.
>  The call progression indicators from the PSTN (ringing, busy, etc) are
> then presented to the caller.****
>
>  ****
>
> We setup these test calls and troubleshoot them in our SIP Training class.
>  ****
>
>  ****
>
> http://www.trainingcity.com/course_outline_detail.asp?courseid=2004 ****
>
>  ****
>
> On Tue, May 8, 2012 at 5:35 AM, Walid Hbiriq <hbiriq.walid at gmail.com>
> wrote:****
>
> Hello all,****
>
>  ****
>
> I have the following problem :****
>
>  ****
>
> -          When testing output calls ,we can’t receive SIP message 180
> ringing in the trace (wireshark),we have only 183 progress ?****
>
> -          The call proceed like this operator x => SBC => operator y****
>
> Can anyone tell me what can be the reason?****
>
>
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org****
>
>
>
> ****
>
>  ****
>
> --
> Thanks... John
>
> John Downing
> John at TrainingCity.com
> 613-435-1170 (w)
> 613-883-1235 (c)
> johndowning (Skype)
> www.twitter.com/TrainingCity****
>
>  ****
>
>
>
> ****
>
>  ****
>
> --
> Thanks... John
>
> John Downing
> John at TrainingCity.com
> 613-435-1170 (w)
> 613-883-1235 (c)
> johndowning (Skype)
> www.twitter.com/TrainingCity****
>
>  ****
>
>
>
> ****
>
> ** **
>
> --
> Thanks... John
>
> John Downing
> John at TrainingCity.com
> 613-435-1170 (w)
> 613-883-1235 (c)
> johndowning (Skype)
> www.twitter.com/TrainingCity****
>
> ** **
>



-- 
Thanks... John

John Downing
John at TrainingCity.com
613-435-1170 (w)
613-883-1235 (c)
johndowning (Skype)
www.twitter.com/TrainingCity
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20120509/2e3061cd/attachment-0002.html>