[SIPForum-discussion] ACME Packet Net-Net 4500 Help

[Yuri Levin]

Hi Randy,

did you configured all necessary settings for this carrier?
at session router section: access-control, session agent (not mandatory),
sip-interface, local-policy
at media-manager section: realm-config and steering-pool?

you can activate sipd debug and look for the sipd.log to find whats wrong
(in case you're not carrying a lot of traffic).

On Mon, Jan 23, 2012 at 6:07 PM, Randy Mills <rmills at aeneas.net> wrote:

>  Hello everyone.  I hate to join the discussion list and start off with
> such a very difficult question, but I am officially struggling with an
> issue with my ACME packet that I was hoping someone could lend some help
> on.
>
> We currently already have an ACME Packet Net-Net 4500 Session Director in
> place and programmed to work for simple SIP registrations/nat
> traversal/switch protection.  However, I have an opportunity coming up in
> that I will be connecting a SIP Trunk from the ACME packet to Verizon for
> off network SIP traffic.  I have programmed the ACME packet to how I
> believe it should be programmed but when I try to pass a call from my
> Metaswitch VP3510 down the SIP Trunk terminating to the ACME packet the
> ACME packet immediately returns back a 403 URI not recognized.
>
> Testing the local policies inside the ACME shows a successful route to the
> correct outside interface which connects to Verizon, however the problem
> appears to be on the setup of the call.
>
> I would be more than happy to send any relevant programming if it would
> help get lead me in a direction of solving this.
>
> Again sorry for starting off with such a difficult issue.  And I would
> GREATLY appreciate any help I could get.
>
> Thanks.
>
> ________________________________________
> Randy Mills
> Telecommunications Switch Manager
> Aeneas Communications, LLC
> http://www.aeneas.net
>
>
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20120124/db4c80cc/attachment-0002.html>