[SIPForum-discussion] 484 Address Incomplete

[Sriram Subramanian]

Hello,
       Ideally in your scenario there should not be a 180 ringing response
as the call would not have landed to the terminating client as the 484
response generally comes for an incomplete dialed number when it is compared
with the dialing plan configured in your server.One point that you can note
here is the server (In which the dialing plan is configured) will send a 484
response after a dial digit wait timer (This  timer is the times taken
between digits for dialing) expiry.

Regards,
Sriram
On Mon, Apr 26, 2010 at 12:09 PM, Murali Vuppandla <mvuppand at cisco.com>wrote:

>  What’s the call flow of 484 address incomplete message. Is there any
> criteria that it should be preceded by 180 ringing ?? And what kind of tone
> does the originating party receive  in case of 484 Address incomplete
> message(is it ring back, reorder or any other tone ).
>
>
>
> Pls. mention some valid scenarios where 484 Address Incomplete message can
> be sent.
>
>
>
> Regards,
>
> Murali.
>
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20100524/16fb32dc/attachment-0002.html>