[SIPForum-discussion] 183 response code
Gonzalo Gasca
gogasca at cisco.com
Sat Dec 4 22:19:53 UTC 2010
I don¹t want to hijack your thread, but I have a similar scenario when I
place calls to 1800 numbers.
Topology:
SIP phone --> B2BUA --> VoiceGW --> PSTN
When I dial PSTN 1800 number Im suppose to get IVR answer immediately, but I
get ringback tone instead.
>From PSTN I receive an ISDN progress message with PI to cut through media,
this is translated to
183 Session Progress with SDP all the way to SIP phone, but SIP phone
instead plays ringback
All 100rel and PRACK is taking care of in B2BUA and we forward proper 183
with SDP to SIP Phone
My question is:
Which RFC describes opening media path on receipt of a 183 response
or what is expected behavior in this scenario.
Thanks
Below SDP sent to SIP Phone
17:55:23.783 |//SIP/SIPTcp/wait_SdlSPISignal: Outgoing SIP TCP message to
10.35.204.91 on port 60087 index 35112
SIP/2.0 183 Session Progress
Via: SIP/2.0/TLS 10.35.204.91:60087;branch=z9hG4bK7644da3e
From: "2323488" <sip:2323488 at X.Y.W.Z>;tag=001da2392141006752a9dcd6-00d07ad0
To:
<sip:91866XXXXXXX at X.Y.W.Z>;tag=e614205a-b2f8-488c-a6dd-70a296684bab-39977403
Date: Sat, 04 Dec 2010 01:55:22 GMT
Call-ID: 001da239-21410009-159f55b2-55e0fa5c at 10.35.204.91
CSeq: 101 INVITE
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
SUBSCRIBE, NOTIFY
Allow-Events: presence, kpml
Contact: <sip:91866XXXXXXX at X.Y.W.Z:5061;transport=tls>
Call-Info: <urn:x-cisco-remotecc:callinfo>; security= NotAuthenticated;
orientation= to; gci= 2-140226; call-instance= 1
Send-Info: conference
Remote-Party-ID:
<sip:91866XXXXXXX at X.Y.W.Z>;party=called;screen=no;privacy=off
Content-Type: application/sdp
Content-Length: 405
v=0
o=CiscoSystemsCCM-SIP 2000 1 IN IP4 X.Y.W.Z
s=SIP Call
t=0 0
m=audio 18758 RTP/AVP 0 101
c=IN IP4 10.35.195.98
a=rtpmap:0 PCMU/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
m=video 0 RTP/AVP 31 34 96 97
c=IN IP4 0.0.0.0
a=rtpmap:31 H261/90000
a=fmtp:31
a=rtpmap:34 H263/90000
a=fmtp:34 MAXBR=1
a=rtpmap:96 H263-1998/90000
a=rtpmap:97 H264/90000
a=inactive
--
Gonzalo Gasca
From: AMIT ANAND <amiit.anand at gmail.com>
Date: Sat, 4 Dec 2010 18:30:17 +0530
To: Jing Jiang <jjiang at biamp.com>
Cc: "discussion at sipforum.org" <discussion at sipforum.org>
Subject: Re: [SIPForum-discussion] 183 response code
No need to respond until it has require:100 REL, in case it has require :
100REL then you need to send PRACK for it..
On Sat, Dec 4, 2010 at 1:22 AM, Jing Jiang <jjiang at biamp.com> wrote:
> When 183 response message with SDP is received, should the client ack this
> message?
>
>
> Jing Jiang
>
>
>
>
> BIAMP SYSTEMS EMAIL NOTICE The information contained in this email and any
> attachments is confidential and may be subject to copyright or other
> intellectual property protection. If you are not the intended recipient, you
> are not authorized to use or disclose this information, and we request that
> you notify us by reply mail or telephone and delete the original message from
> your mail system.
>
>
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
>
--
Thanks
Amit Anand
_______________________________________________
This is the SIP Forum discussion mailing list
TO UNSUBSCRIBE, or edit your delivery options, please visit
http://sipforum.org/mailman/listinfo/discussion
Post to the list at discussion at sipforum.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20101204/f3d248bf/attachment-0002.html>
More information about the discussion
mailing list