[SIPForum-discussion] 484 Address Incomplete

[Vijay Tiwari]

Hello Murali

484 address incomplete is means that number you are dialing in not complete.
like if you configure your server man number of dialing digits 10 and if you
dialing less then 10 digits your server send you 484 address incomplete
error code.

 Is there any criteria that it should be preceded by 180 ringing ??
No, May be your endpoint give you false ringing and if your server send the
request to other server or pstn network then may be some server generate 183
session progress but not 180 ringing any how.

Thanks
Vijay
On Mon, Apr 26, 2010 at 12:09 PM, Murali Vuppandla <mvuppand at cisco.com>wrote:

>  What’s the call flow of 484 address incomplete message. Is there any
> criteria that it should be preceded by 180 ringing ?? And what kind of tone
> does the originating party receive  in case of 484 Address incomplete
> message(is it ring back, reorder or any other tone ).
>
>
>
> Pls. mention some valid scenarios where 484 Address Incomplete message can
> be sent.
>
>
>
> Regards,
>
> Murali.
>
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
>
>


-- 
They can because they think they can.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20100429/b77bc73d/attachment-0002.html>