[SIPForum-discussion] How to use sips(TLS) to make SIP call?

[Tomasz Zieleniewski]

Hi,

2009/3/1 Steven Wu <Steven.Wu at teleca.com>

>  Hi,
>
> Opensips 1.4.0 has been installed in my linux server with TLS enabled.
> I am confusing with the scenerio of how to use SIPS/TLS to make security
> VoIP by Opensips.
> I got the information like following from console after run opensips 1.4.0
> with TLS enabled.
>
> Listening on
>              udp: 192.168.1.11 [192.168.1.11]:5060
>              tcp: 192.168.1.11 [192.168.1.11]:5060
>              tls: 192.168.1.11 [192.168.1.11]:5061
> Aliases:
>              tls: wavehost:5061
>              tcp: wavehost:5060
>              udp: wavehost:5060
>
> As RFC3261 said, 5061 is default port for SIP. So, there are two ports here
> after TLS enabled. My question is how to configure my UA to use the SIP
> server?
> In the other word, how to use SIP server with TLS enabled? My UA is SJphone
> 1.6 and XLite 3.0, seems they doesn't support SIPs/TLS. Is there any open
> source SIP UA which support TLS availiable ?
>
According to RFC3261 next hop address and routing procedures should be
determined by applying the DNS precedures decribed in RFC 3264.
The default port for sip (udp/tcp) is 5060 not 5061 this is for sips (tls).
To use sips both UA and Proxy need to support it. (registration and routing)

Kind regards
Tomasz


>
> Best regards,
> Steven Wu
>
>
>
>
> _______________________________________________
> This is the SIP Forum discussion mailing list
> TO UNSUBSCRIBE, or edit your delivery options, please visit
> http://sipforum.org/mailman/listinfo/discussion
> Post to the list at discussion at sipforum.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20090302/3dc88812/attachment-0002.html>