[SIPForum-discussion] dial-peer type voip
Maddox, Sean (Practice Principal, TSG Americas)
sean.maddox at hp.com
Fri Jun 29 16:50:01 UTC 2007
Try using the voice translation rules/profiles:
voice translation-rule 1
rule 1 /^13280/ /525513280/
!
voice translation-profile voice_PREFIX_5255
translate called 1
dial-peer voice 5 voip
description XXX
translation-profile outgoing voice_PREFIX_5255
max-conn 6
destination-pattern 132820[4,5,6,7,8,9].
session protocol sipv2
session target ipv4:1.1.1.2
dtmf-relay rtp-nte
fax-relay ecm disable
fax rate disable
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none
________________________________
From: discussion-bounces at sipforum.org
[mailto:discussion-bounces at sipforum.org] On Behalf Of Gomez Leopoldo
Sent: Friday, June 29, 2007 8:10 AM
To: discussion at sipforum.org
Subject: [SIPForum-discussion] dial-peer type voip
Can somebody help me?
I have the following dial-peer type voip:
dial-peer voice 5 voip
description XXX
max-conn 6
destination-pattern 132820[4,5,6,7,8,9].
session protocol sipv2
session target ipv4:1.1.1.2
dtmf-relay rtp-nte
fax-relay ecm disable
fax rate disable
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none
How can I add the prefix 5255 before to send it to IP address 1.1.1.2?
Tks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20070629/691389a8/attachment-0002.html>
More information about the discussion
mailing list