[SIPForum-discussion] let me out, thanks

黄泽旭 hzx1636 at 163.com
Tue Jun 19 03:13:59 UTC 2007


 break out!  
在2007-06-19,"Yang Laura Jun (Laura)" <jyang5 at alcatel-lucent.com> 写道:
You may have long values in SIP headers like From, To, Contact. Many Via headers will also make a large INVITE message. See an example in section 3.1.1.7 in RFC 4475.
 
From:discussion-bounces at sipforum.org [mailto:discussion-bounces at sipforum.org]On Behalf OfEugene Mednikov
Sent: Monday, June 18, 2007 11:50 PM
To: 'Kerry'; 'discussion at sipforum.org'
Subject: Re: [SIPForum-discussion] SIP testing: big SIP message
 
Greetings!
 
    I forgot to tell that I'm talking about huge INVITE.
 
Respectfully yours, Eugene Mednikov.
 
Software Engineer
Hermon Labs
972-4-6288001, 207
972-54-4520187
em at hermonlabs.com
www.hermonlabs.com
 
 
From: Kerry [mailto:sukerry at 126.com]
Sent: Sunday, June 17, 2007 3:28 PM
To: Eugene Mednikov; 'discussion at sipforum.org'
Subject: Re: [SIPForum-discussion] SIP testing: big SIP message
Eugene Mednikov,您好!
 
  a message with a lot of Contacts is a good choice.
      as per rfc3261, if a sip account is registered by multiple endpoints, there are many contacts in database for this account, and the ok message will contain all of the contacts , which results in a
       really large sip message
 
======== 2007-06-17 18:54:00 您在来信中写道: ========
 
Greetings!
 
RFC 3261. 18.1.1 Sending Requests
 
   If a request is within 200 bytes of the path MTU, or if it is larger
   than 1300 bytes and the path MTU is unknown, the request MUST be sent
   using an RFC 2914 [43] congestion controlled transport protocol, such
   as TCP. If this causes a change in the transport protocol from the
   one indicated in the top Via, the value in the top Via MUST be
   changed.  This prevents fragmentation of messages over UDP and
   provides congestion control for larger messages.  However,
   implementations MUST be able to handle messages up to the maximum
   datagram packet size.  For UDP, this size is 65,535 bytes, including
   IP and UDP headers.
    How do I create message of length 65535 bytes? Huge SDP I assume. But I don't know length of message before SDP in advance. Is there any way to overcome that?
 
Respectfully yours, Eugene Mednikov.
 
Software Engineer
Hermon Labs
972-4-6288001, 207
972-54-4520187
em at hermonlabs.com
www.hermonlabs.com
 
= = = = = = = = = = = = = = = = = = = = = =
        致
礼!
 
              Kerry
              sukerry at 126.com
               2007-06-17
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20070619/62f84a87/attachment-0002.html>


More information about the discussion mailing list