[SIPForum-discussion] Hello Elites

[Beith, Gordon]

You shouldn't ignore Juniper's SBC either...

 

________________________________

From: discussion-bounces at sipforum.org
[mailto:discussion-bounces at sipforum.org] On Behalf Of Chris Liu
Sent: Wednesday, July 25, 2007 4:03 PM
To: Deepak Shenoy
Cc: discussion at sipforum.org
Subject: Re: [SIPForum-discussion] Hello Elites

 

Best part of Nextone SBC is QOS/OSS managment, powerful routing and
billing CDRs.

 

You can look at ACME SBC as well. These two products has its own pros
and cons.

 

On 7/25/07, Deepak Shenoy <dshenoy at soundbite.com> wrote: 

What is the general quality of the Nextone SBC that people are seeing.?

Any opinions on this? Are people generally happy with the
quality/support of this SBC ?

 

How do they compare to other SBCs that people might have used.?

 

Any opinions are welcome.

 

Thanks

 

________________________________

From: Chris Liu [mailto: chrisxliu at gmail.com] 
Sent: Wednesday, July 25, 2007 3:51 PM 
To: Deepak Shenoy
Cc: andrew at asiatel.com.sg; Ankit; discussion at sipforum.org 


Subject: Re: [SIPForum-discussion] Hello Elites

 

Make sure in the endoint configure the IP block setting cover your ATA
IP subset. If the the setting here not match, you probably will get
one-way audio or no ringback tone. 

 

Chris

 

On 7/25/07, Deepak Shenoy < dshenoy at soundbite.com
<mailto:dshenoy at soundbite.com> > wrote: 

Besides if you don't route media through Nextone you will never get QOS
reports/alarms .

Has anybody seen any problems with nextone QOS stats. I have noticed 
cases where a particularly good sounding call is showing 80% lost
packets and a poor r-factor in the CDR.

If anybody has seen this problem let me know.

Thanks
Deepak



-----Original Message----- 
From: Andrew Yu [mailto:andrew at asiatel.com.sg]
Sent: Wednesday, July 25, 2007 10:07 AM
To: Ankit
Cc: Deepak Shenoy; discussion at sipforum.org 
Subject: Re: [SIPForum-discussion] Hello Elites

Hi Deepak, 

I always configure all my endpoint to route media, this is a safe way to

ensure and media is always route via nextone and to avoid audio issues. 

--
Cheers,

Asiatel Singapore Pte Ltd
Andrew Yu 

19 Jalan Kilang Barat
#06-01, Acetech Centre
Singapore 159361

Tel: +65 6271 8233
Fax: +65 6274 4266


Ankit wrote:
> Hello Friends, 
>
> Actually We are already running a lot of clients in Nextone, But 2 day


> back i faced a new problem. While configuring an endpoint, i have
> checked Never route media and asked the client who was also using 
> Nextone to do the same settings at his end. He was calling from his 
> ATA with real ip which has been registered at his Nextone and then
> call is hiting my IP.
> With this configuration, he got no ingback, but when we did route 
> media from both end, he got proper ringback. 
>
> Call Flow:-
>
> ATA--Nextone(client)--Nextone(Client with our Endpoint)--Nextone(Our
> switch)--Vendor
>
> So i asked, whats the logic of this and what could be 
>
> On 23/07/07, *Deepak Shenoy* < dshenoy at soundbite.com
> <mailto: dshenoy at soundbite.com <mailto:dshenoy at soundbite.com> >>
wrote:
> 
>     I am using Nextone SBC on a regular basis. I do get ring-back and
>     2 way audio. Send me your call flow/ethereal capture
>
>     Make sure you are getting 183/180 ringing and use the SDP info to 
>     set the remote RTP address/UDP port.
>
>
>
>
>
>
>
>
------------------------------------------------------------------------
>
>     *From:* discussion-bounces at sipforum.org
>     <mailto:discussion-bounces at sipforum.org> [mailto: 
>     discussion-bounces at sipforum.org 
>     <mailto: discussion-bounces at sipforum.org
<mailto:discussion-bounces at sipforum.org> >] *On Behalf Of *Ankit
>     *Sent:* Monday, July 23, 2007 4:26 PM
>     *To:* discussion at sipforum.org <mailto:discussion at sipforum.org>
>     *Subject:* [SIPForum-discussion] Hello Elites 
>
>
>
>     Hi,
>
>     Is there any person here who have some technical idea about
>     Nextone Session board controller (SBC).
>
>     Also please guide me to know the root causes for getting no ring 
>     back and one way audio. 
>
>     --
>     Regards,
>     Ankit Kumar
>     Contact:- 919911591577
>
>
>
>
> --
> Regards,
> Ankit Kumar
> Contact:- 919911591577
> 
------------------------------------------------------------------------
>
> _______________________________________________
> This is the SIP Forum discussion mailing list 
> TO UNSUBSCRIBE, or edit your delivery options, please visit 
http://sipforum.org/mailman/listinfo/discussion 
> Post to the list at discussion at sipforum.org
>
>
>
> __________ NOD32 2416 (20070724) Information __________ 
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com <http://www.eset.com/> 
>



_______________________________________________
This is the SIP Forum discussion mailing list
TO UNSUBSCRIBE, or edit your delivery options, please visit
http://sipforum.org/mailman/listinfo/discussion
Post to the list at discussion at sipforum.org 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sipforum.org/pipermail/discussion/attachments/20070725/d1533417/attachment-0002.html>